|
-e-800x600_small.jpg) 
H250-m3 Blast pot and accessory package (click on the picture to enlarge it)
H250-m3 Multi-Media Blast Pot
We are proud to offer you our complete MultiMedia Eco-Blasting
package featuring Harmon Distributing’s exclusive H250-m3 MultiMedia
Eco-Blasting Equipment which will include everything you need to begin
Eco-Blasting. The H250-m3 MultiMedia Eco-Blasting Pot was four years in
design with hundreds of hours of actual field testing.
The H250-m3
equipment package does not have hidden cost options. Our MultiMedia Eco-Blasting
pot package includes the compressor air aftercooling and
moisture separating equipment. What we offer you is exactly the same MultiMedia
Eco-Blasting pot package we ship to off-shore drilling platforms and 6 other
countries. The Harmon H250-m3 blast pot was designed to be small enough
to be maneuvered easily on walkways and in tight spaces allowing you to get
closer to the worksite and to reduce your extending the length of expensive,
heavy blast hose required to reach the work area. 4 years of development and
hundreds of hours of operation have proven the Harmon H250-m3 is
specifically designed to economically use ALL blast media but to excel when
using our non-sparking, extremely effective K2, the
MaxxStrip as well as the
SofStrip XL sodium bicarbonate Eco-Media.
Each H250-m3 is
handcrafted with pride at our facility in Portland, Oregon.
May we build one
for you?
·
Each pressure vessel is
individually inspected, pressure tested to 195 PSI and certified to operate continuously at 150 PSI. Each vessel is then given an individual, permanent serial number.
·
Each serial number is recorded and
kept permanently on record by the American Society of Mechanical Engineers (ASME)
which can identify each vessel in future years.
· Certification for European (PED/CE)
and Canadian standards are pending.
· The H250-m3 is mounted on our own
specially designed 800 LB capacity, pneumatic tired, hand truck for better
balance and ease of movement. Other mounting options can be made available as
requested.
H250-m3 MultiMedia
Eco-Blast Pot - EXCLUSIVE PRODUCT FEATURES:
- Exclusive:
The H250-m3 has the exclusive capability to economically use ALL blast media!
-
Exclusive: The H250-m3 has a newly designed media control
valve with tungsten carbide components to minimize wear when using harder
sand type abrasives.
- Exclusive: The
H250-m3 MultiMedia Eco-Blast pot can be converted from soda blaster to a cob
blaster or a sand blast machine and back again in just 15 minutes per
changeover!
-
Exclusive: The H250-m3 can blast with
the media/air mixture exiting the hose and then blow off the work surface
with air only through the same blast line!
·
The H250-m3 has a larger tank
capacity of 2.5 cubic feet
·
The H250-m3 has a larger sized
maintenance/fill port (4") for ease of use.
·
Each H250-m3 pressure vessel is
hydraulically safety tested to 195 PSI.
·
The H250-m3 is certified to operate
at a 100% continuous duty cycle of 150 PSI.
·
The H250-m3 comes standard with 125
PSI production components but can be special ordered with the optional 150 PSI
"High Output Production Package".
·
The H250-m3 pressure vessel is
double powder coated and uses 304 stainless steel piping and hardware.
·
The H250-m3 can be special ordered
and powder coated in the color of your choice to custom color match the H250-m3
with YOUR company trucks and compressors.
H250-m3 MSRP with soda, cob and sand
capability
including
the aftercooler and two high flow moisture separators is $7,495.00
The H250-m3 can also be ordered as an
H2500 self contained trailer mounted unit featuring the Airman 185 compressor.
The Airman 185 compressor is the quietest, most fuel efficient compressor
available in the marketplace.
Harmon Distributing is proud to unveil the H250-m3 Multi-Media Blast Pot. The
H250-m3 is the most versatile, cost-effective, size-efficient and operator friendly blast pot in the industry.
THE ONLY BLAST POT YOU WILL EVER NEED!
Key Benefits
In order to build a better machine Harmon Distributing addressed the
following:
-
The
system had to be more portable and light enough to be put into the back of a
pick up truck or trailered to a job site.
-
The
system had to be versatile. It had to be able to use multiple medias and
media particle sizes, without major
adjustments or not compromise operator safety.
-
The system had to solve the problem of moisture control.
-
The
system had to be easy to maintain, be able to work long hours without complete
teardown, and with brief instruction, simple enough to use by anyone without
the need for extensive training.
-
The system had to be able to use a variety of air compressor
systems.
-
The
system had to be cost effective.
After 4
years of design and field testing, Harmon Distributing answered ALL these requirements with the
H250-m3. The H250-m3 is designed to
handle the need for all Multi-Media requirements by being able to use...
Potassium sulfate, Sodium bicarbonate,
Magnesium sulfate, Corncob and Corn Cob Blastings. This makes the H250-m3 the most
versatile system on any job site.
The H250-m3 Multi-Media Blast Pot has:
- 2.5 bag capacity
- Quick, precise media flow adjustment
- Allows for adjustment to an average usage rate of 3/4 lb. to 1-1/2 lbs. media flow per
minute
- Pots that have not been specifically designed to properly meter soda or corn cob
can use an average of three to four - 50
lb. bags per hour
- THERE
GOES YOUR PROFIT MARGIN!
- Two separate Air pressure adjustment regulators and moisture separators
are located on the machine
- This allows you to adjust blast line PSI at the pot NOT
all the way back at the compressor
- This Eco-Media pot is specifically designed so that with the optional
HighOutput Package, you can use up to a #7 (7/16") tip without
losing blast efficiency by having a restriction creating an internal pressure loss inside the pot
- THE COMPETITION DOES NOT and CANNOT!
Pricing
This price reflects a COMPLETE package, ready for you to use!
| Description |
SKU # |
Price |
Freight NOT Included |
| Harmon Distributing |
H250-m3 |
$7,495.00 |
We deliver NATIONALLY or
INTERNATIONALLY |
| NOTE: Unlike
our competitors, this package includes our own high-flow compressor air aftercooler!
The only additional things required to operate is the air compressor and the
blast media. |
| Soda-Blast.Com is Harmon Distributing's industrial
products division. While baking
soda
and corn cob is the mainstay of the company, this division offers a
developed line of products and applicators that deliver either baking
soda or
corn cob as a parts cleaning medium in metalworking shops.
For most metalworking shops parts cleaning is, well, a pain. It's a
non-value added step in the manufacturing process that while, often
necessary, gets metalworking businesses into areas in which they have
little or no expertise.
If a shop must clean parts, what's the best method? Of course there
is no easy answer. It used to be possible to soak parts in a vapor
degreaser and accomplish most soil removal requirements. That's no
longer feasible because of environmental regulations covering
atmospheric discharges and toxic waste disposal.
Options include parts aqueous and semi-aqueous washing units with
agitation sometimes generated by ultrasonics. These methods work well
for specific materials and soils but lack the kind of general purpose
effectiveness that vapor degreasing provides. And, there is usually a
waste disposal consideration with these wet processes. Then there are
dry cleaning processes. These usually employ a grit which is
accelerated to high speed to
blast
off dirt or other soils attached to workpieces. Glass beads, metal or
plastic shot--even peanut shells--are versions of this process.
It's into this category of parts cleaning that SofStrip™ falls.
They have successfully used this baking
soda
blast
on applications in aerospace, paint removal for rebuilding and
remanufacturing operations and in plant maintenance departments.
Baking soda
as a grit
blast medium offers several advantages over other solid
mediums, according to the company. As each crystal of
sodium-bicarbonate strikes the surface of a workpiece it crushes
against the surface. When the crystal strikes a workpiece surface, the
crystal is destroyed but in the process takes a bit of the soil with
it.
Crystals can be sized to provide the necessary cleaning
aggressiveness for an application. In part, because the baking
soda
crystal collapses on contact, removal problems involving getting the
media from internal passages or small bores is eliminated. In
addition, baking
soda is
water soluble therefore getting the media out of highly intricate
parts is also simplified. They can be rinsed free out of the workpiece
if necessary.
As a medium, baking
soda is
relatively soft. This makes it an effective
blast
medium for delicate substrates such as aluminum and thin wall sections
like cylinder fins or aerospace structures. There is little or no
peening action with baking
soda
blast.
Baking soda
is inert making its use and disposal less problematic than some other
materials.
Soda-Blast.Com offers a full line of
blast
application equipment to accompany their baking
soda
media. For job shops with a variety of applications, there is a
stand-alone
blast cabinet available with interior dimensions up to height
by width by length of 60 by 24 by 42 inches. There are systems
available for higher volume/lower mix applications as well.
Cleaning workpieces and equipment is a necessity for many shops.
Unfortunately there is no universal method effective for all cases.
However, baking
soda
grit blast
offers several advantages over other methods, particularly with regard
to environmental and disposal considerations. That may make checking
into a system for your application a good idea.—
|
| 
-e-800x600.jpg)
